- Online Monitoring Equipment
Online analyzers are equipment capable of continuous and automatic monitoring of water and gas samples in the places where they are installed. These analyzers are currently manufactured only in Western European countries, America, Japan and some eastern countries such as Singapore (to a limited extent). Relying on its internal capabilities, this company has started building analyzers for physicochemical parameters (pH, electrical conductivity, dissolved oxygen, residual chlorine, temperature, etc.) in the first step and is currently implementing complex parameters such as organic load (COD, BOD, TOC), nitrate, phosphate, etc.
MX-1000
MX-1000 Online analyzers are equipment capable of continuous and automatic monitoring of water and gas samples in the places where they are installed. These analyzers are currently manufactured only in Western European countries, America, Japan and some eastern countries such as Singapore (to a limited extent). Relying on its internal capabilities, this company has started building analyzers for physicochemical parameters (pH, electrical conductivity, dissolved oxygen, residual chlorine, temperature, etc.) in the first step and is currently implementing complex parameters such as organic load (COD, BOD, TOC), nitrate, phosphate, etc.
| MX-1000 |
The MX-100/200 transmitter has a powerful processor and a resistant body, which is designed and built for industrial environments. The ability to save results with date and time, as well as record and perform ten-point calibration for optical parameters such as turbidity, makes it suitable for sensitive measurements. High accuracy of measurement with proper performance and good adaptation to harsh industrial conditions make it suitable for use in polluted and dangerous environments. This device is used for continuous measurement in various sources: refinery, power plant, petrochemical, food industry, agriculture, etc. More... MX-100/200 DO MX-100/200 EC MX-100/200 pH
| MX-100/200 |
The MX-100/200 transmitter has a powerful processor and a resistant body, which is designed and built for industrial environments.
The ability to save results with date and time, as well as record and perform ten-point calibration for optical parameters such as turbidity, makes it suitable for sensitive measurements. High accuracy of measurement with proper performance and good adaptation to harsh industrial conditions make it suitable for use in polluted and dangerous environments. This device is used for continuous measurement in various sources: refinery, power plant, petrochemical, food industry, agriculture, etc.
| GT-FC |
| MX-FC |
The MX-FC device is one of the real-time and continuous measuring devices of this company, which, while being small and lightweight, has all the necessary facilities for a stable and easy-to-use controller.
This device is an optimal controller for industrial purposes, which can be connected to all kinds of chlorine and temperature electrodes and is able to analyze:
- Total chlorine (Total Chlorine Monitor)
- Residual chlorine monitor
- Chlorine Dioxide
- Ozone sensor
The possibility of connecting amperometric chlorine sensors with internal pH measurement capability to stabilize the applied potential on the electrode has enabled the device to use sensors with the modern technology provided in the disinfection system.
| MX-10 |
The MX-10 device is one of the real-time and continuous measurement devices of this company, which, while being small and light, has all the necessary facilities for a stable and easy-to-use controller.
This device is an optimal controller for industrial purposes with the ability to connect various pH/ORP, electrical conductivity and temperature electrodes. This type of transmitter has a resistant body, very small and lightweight (DIN96) and is used for a wide range of needs, from ultrapure water production processes to the wastewater treatment industry.
This analyzer is capable of measuring and displaying one or two parameters such as current isolation output (4~20mA), warning output terminal (2 Circuit change over) and RS485 digital output, the ability to send pH/ORP and temperature measurement results as well as electrical conductivity. and temperature at the same time.
| MX-10 |
The MX-1 device is one of the real-time and continuous measuring devices of this company, which, while being small and lightweight, has all the necessary facilities for a stable and easy-to-use controller.
This device is a panel type whose size is based on DIN46 standard. The MX-1 is the optimal controller for industrial purposes that can be connected to types of EC, pH/ORP and temperature electrodes.
This analyzer with the ability to measure and display pH and ORP with temperature or electrical conductivity and TDS with temperature, features such as isolated analog output (4~20 mA) and alarm output terminal (2 Circuit change over) to send EC measurement results and commands. It has pH/ORP and temperature.
