Ten-Channel Controller

Ten-Channel Controller

(Economy Multi Parameter Transmitter) 

The MX-500 controller is a digital type, and by using

a graphic screen and a normal keyboard, it is cheaper

and more economical than the MX-1000 model of

this company, which is in the same category of digital


With three Modbus ports and four analog ports, this

device can connect and display all kinds of sensors



User friendly

- The presence of a large and color touch screen with

a high processor speed

- The presence of USB port, the ability to connect

flash memory and LAN output enables the transfer of

information in the most convenient way possible.



Temperature compensation by microcomputer:

For temperature sensitive sensors, very accurate temperature compensation is possible over a wider temperature range than the analog method.

power supply:

this type of device can be powered by DC with voltages of 12~24 volts or 100~240 VAC and frequency

of 50/60Hz.

Temperature indicator:

By adding types of temperature sensors, you will be

able to measure the temperature of the sample or even

the environment.

Perform more than one point calibration:

Performing a multi-point calibration allows you to

achieve more accurate results over a wider range of


Isolated and digital analog output:

The device has 4-20 mA output with isolated input

and output terminals, and the RS232/RS485 interface

provides the ability to connect to any external device.

Relay output:

The existence of four output relays to announce the

alarms in the system or when the values go out of the

defined upper and lower limits, allows it to be used in

control or automation systems.

Ability to connect all kinds of analog and
digital sensors

All spectroscopic sensors such as COD, nitrate,


- Types of chlorine sensors

- Ozone sensor

- Dissolved Oxygen

- Suspended Solids

- turbidity

- Sensor (pH/ORP)

- electrical conductivity (EC)

- Ion selector sensors

and any sensor with analog or digital output

Computational parameters

The powerful processor of this device allows you, in

addition to the ability to connect all kinds of sensors

and provide their detailed and classified reports, to

define all kinds of calculation parameters with complex formulas for it.

MX-1000 is able to receive different formulas to convert parameters to each other and provide calculation

parameters. Some of the following parameters can be

mentioned among others:

- Calculation of TDS and salinity from parameters of

electrical conductivity, temperature and pressure

- Calculation of TSS from turbidity

- Calculation of BOD and TOC from the sensor of

organic load and COD