Residual chlorine and total chlorine analyzer


The MX-FC Device is One of the Instant and Continuous Measuring Devices of this Company, which, while Being Small and Light, Has All the Necessary Facilities for a Stable and Easy-to-Use Controller.

This Device is an Optimal Controller for Industrial Purposes, which Can Be Connected to All Kinds of Chlorine and Temperature Electrodes and is Able to Analyze:

  • Total Chlorine (Total Chlorine Monitor)
  • Residual Choline Monitor
  • It is a Sensor for Ozone and Other Oxidants.

The Possibility of Connecting Amperometric Chlorine Sensors with Internal pH Measurement Capability to Stabilize the Applied Potential on the Electrode Has Enabled the Device to Use Sensors with the Latest Technology Provided in the Disinfection System.


DIN96 Compact Size

The Standard Size of 96 x 96 mm with a Panel Cut of 89 x 89 mm (DIN Standard) and Light Weight Along with the Use of Electronic Components from the Most Famous and Reliable Brands of Electronic Equipment in the World Have Made It Suitable and Efficient.


This Device, with a Graphic Screen Suitable for Use in Industrial Spaces and a High-Precision Analog-to-Digital Converter, is Able to Read Several Parameters with Appropriate Accuracy and Repeatability.

Isolated Analog Output

The Device has a Current Analog Output of 4-20 mA with Isolated Input and Output Terminals, which Provides the Ability to Connect to any External Device. This Output is Based on Optical Electronic Isolation Technology and Provides the Possibility of Sending Results to Long Distances with Minimal Noise.

Relay output

The Existence of 3 Two-State Relays, the Alarms in the System or the Departure of the Values ​​from the Upper and Lower Limits Are Announced on the Screen as a Free Voltage Connection Output to Be Used in Control or Automation Systems.


This Isolated Output Alarm Signal Device Has the Ability to Define Upper and Lower Alarm Limits and Store and Disable Alarms.

Strong Electronics

The High Precision Signal Amplifier with Very Low Temperature Drift Provides the Accuracy and Stability Suitable for the Measurements with the Least Fluctuation. This Type of Transmitter is Very Small and Light and is Used for a Wide Range of Needs from Drinking Water Production Processes and Sanitation to the Sewage Treatment Industry.


۹۶x96x77 mm

Automatic and Manual Temperature Compensation

Due to the Dependence of Chlorine Amount On pH and Temperature, Very Accurate Temperature Compensation is Possible in a Wider Temperature Range Than the Analog Method.

Free Power Supply

The Power Supply of this Type of Device Can be DC with Voltages of 12 and 24 or Periodically with Voltage of 100~240VAC and Frequency of 50/60Hz.

Temperature Indicator

By Adding a Variety of Temperature Sensors, You Will Be Able to Measure the Temperature of the Sample or Even the Environment.

Perform More Than One Point Calibration

Performing a Multi-Point Calibration Allows You to Achieve More Accurate Results Over a Wider Measurement Range.

Easy Installation

Low Maintenance Cost

Very High Zero Point Stability

The Possibility of Multi-Point Calibration

To Measure:

Total Chlorine Monitor

Residual Chlorine Monitor

Chlorine Dioxide

Ozone Sensor

download file   MX-FC-ENG