Ten-Channel Controller |
Ten-Channel Controller
(Economy Multi Parameter Transmitter)
The MX-500 controller is a digital type, and by using
a graphic screen and a normal keyboard, it is cheaper
and more economical than the MX-1000 model of
this company, which is in the same category of digital
transmitters.
With three Modbus ports and four analog ports, this
device can connect and display all kinds of sensors
User friendly
- The presence of a large and color touch screen with
a high processor speed
- The presence of USB port, the ability to connect
flash memory and LAN output enables the transfer of
information in the most convenient way possible.
Features
Temperature compensation by microcomputer:
For temperature sensitive sensors, very accurate temperature compensation is possible over a wider temperature range than the analog method.
power supply:
this type of device can be powered by DC with voltages of 12~24 volts or 100~240 VAC and frequency
of 50/60Hz.
Temperature indicator:
By adding types of temperature sensors, you will be
able to measure the temperature of the sample or even
the environment.
Perform more than one point calibration:
Performing a multi-point calibration allows you to
achieve more accurate results over a wider range of
measurements.
Isolated and digital analog output:
The device has 4-20 mA output with isolated input
and output terminals, and the RS232/RS485 interface
provides the ability to connect to any external device.
Relay output:
The existence of four output relays to announce the
alarms in the system or when the values go out of the
defined upper and lower limits, allows it to be used in
control or automation systems.
Ability to connect all kinds of analog and
digital sensors
All spectroscopic sensors such as COD, nitrate,
phosphate
- Types of chlorine sensors
- Ozone sensor
- Dissolved Oxygen
- Suspended Solids
- turbidity
- Sensor (pH/ORP)
- electrical conductivity (EC)
- Ion selector sensors
and any sensor with analog or digital output
Computational parameters
The powerful processor of this device allows you, in
addition to the ability to connect all kinds of sensors
and provide their detailed and classified reports, to
define all kinds of calculation parameters with complex formulas for it.
MX-1000 is able to receive different formulas to convert parameters to each other and provide calculation
parameters. Some of the following parameters can be
mentioned among others:
- Calculation of TDS and salinity from parameters of
electrical conductivity, temperature and pressure
- Calculation of TSS from turbidity
- Calculation of BOD and TOC from the sensor of
organic load and COD
